Digital servo press machine - List of Manufacturers, Suppliers, Companies and Products

Digital servo press machine Product List

1～4 item / All 4 items

Displayed results
Also for CFRP! Servo press 'ZENFormer torque'

Also for CFRP! Servo press 'ZENFormer torque'

Approximately 1m ultra-long stroke! High-precision machining combining load control and position control.

The "ZENFormer torque" is a linear digital servo press machine suitable for molding composite materials. It allows for molding that combines load control and position control, maintaining parallelism of the slide during both position control, where micron-level bottom dead center settings can be made, and load control. With a nut drive structure, it ensures a long stroke of approximately 1 meter, accommodating large and deep drawing molds. In pressure holding mode, it can maintain pressure for up to 180 minutes in one-minute increments, while in high cycle mode, it can set pressure holding for up to 320 seconds in 0.01-second increments. 【Features】 ■ High-precision processing combining load control and position control ■ Approximately 1 meter of ultra-long stroke ■ Long pressure holding time of up to 180 minutes ■ ZENFormer’s unique parallel pressure, high precision, and visualization/numerical representation *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Processing Example] Half-cut of multilayer film / Punching of asymmetric film

[Processing Example] Half-cut of multilayer film / Punching of asymmetric film

Control the blade tip depth in microns! Introducing processing examples with "ZENFormer nano."

When cutting film, traditionally, due to the variation in the bottom dead center of the press machine, thicker separators were used for backing, and the blade tip was inserted deeply for processing. With the 'ZENFormer nano', which has a bottom dead center repeat accuracy in the micron range, the variation in the bottom dead center can be reduced to a few micrometers, allowing for the use of ultra-thin separators. Additionally, by controlling the blade tip depth in microns and performing a just-cut on only the first layer to be cut, we eliminated the generation of substrate debris and the crushing and curling of cut edges caused by excessive blade pressure, achieving stability and improvement in product quality. 【Features of ZENFormer nano】 <Half-cutting of multilayer films> ■ Variation in the bottom dead center can be reduced to a few micrometers ■ Allows for the use of ultra-thin separators *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Compact model! Digital servo press "ZENFormer nano"

Compact model! Digital servo press "ZENFormer nano"

Molding of small and thin items at the micron level. A press ideal for multi-material molding of metals, films, resins, and more.

The "ZENFormer nano" is a compact direct-drive digital servo press machine achieved through a structure that places the motor at the bottom. With ZENFormer’s unique mechanism of "4-axis independent control," it realizes complete parallel control. The repeat accuracy at the bottom dead center is also in the micron range, allowing for molding compatible with multi-materials such as metal foils, functional films, and resins. With a rich series lineup in low load ranges of 5t, 10t, 20t, and 30t, we propose minimal equipment specifications for molding that does not require large loads. As a mechanical press with low environmental impact, it is also ideal for replacing hydraulic presses. 【Features】 - Achieves compactness with an "under-drive structure" that places the servo motor at the bottom - Improved stability due to a lower center of gravity - A rich series lineup in low load ranges of 5t, 10t, 20t, and 30t - High applicability to accommodate multi-materials - ZENFormer’s unique parallel pressure application, high precision, and visualization/numerical representation *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【Molding Example】CFRTP High Precision Molding

【Molding Example】CFRTP High Precision Molding

Bending, R-shaping, deep drawing, and detailed shaping can also be achieved with high-precision parallel pressing!

We would like to introduce a molding case using the direct drive digital servo press "ZENFormer torque." It enables high-precision molding of carbon fiber resin across various fibers and forms, such as cross materials, UD materials, and non-woven fabrics. High-precision parallel pressing allows for bending, R-forming, deep drawing, and detailed molding. Additionally, in the flat plate molding of CFRTP, the high-precision parallel pressing of this product allows for molding characteristics equal to or better than those achieved with hydraulic presses at less than half the molding load. 【Features of ZENFormer torque】 ■ High-precision molding of carbon fiber resin is possible across various fibers and forms, such as cross materials, UD materials, and non-woven fabrics. ■ In flat plate molding of CFRTP, it achieves molding characteristics equal to or better than those of hydraulic presses at less than half the molding load. *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Technology

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.